Saturday, September 30, 2023

    Latest Posts

    Mastering Ariens Snowblower Maintenance: Tips for Draining Gas

    To drain gas from an ariens snowblower, locate the gas tank and remove the fuel cap and drain plug. Pour the gas into a container and dispose of it properly.

    If you own an ariens snowblower, you may need to drain the gas from the tank before performing maintenance, transporting the machine, or storing it for an extended period. With the right tools, the process is quick and straightforward. In this article, you’ll learn how to drain the gas from an ariens snowblower by following clear, step-by-step instructions.

    Additionally, before starting the process, you should know how to move the snowblower safely and avoid spilling or splashing gasoline. Let’s start with the first step in draining the gas, locating the gas tank.

    Mastering Ariens Snowblower Maintenance: Tips for Draining Gas


    Why Draining Gas Is Important

    To keep your ariens snowblower in good working condition, it is important to drain the gas from it after each season. Here are the reasons why:

    • Prevents fuel from deteriorating: When gas sits in a snowblower’s fuel tank for a long time, it can become stale, and even form deposits that can clog up the carburetor, making it difficult to start the engine.
    • Enhances engine performance: Old gas can create a varnish-like substance in the carburetor, which can obstruct fuel flow and negatively affect engine performance.
    • Extends the life of the snowblower: Storing a snowblower for a long period with gas in the tank can cause corrosion, which can damage the fuel tank, fuel lines, and carburetor.

    How To Drain Gas From Ariens Snowblower

    Draining gas from an ariens snowblower is not an arduous task, and can easily be done following these steps:

    • Turn off the engine and allow it to cool down completely before commencing the process.
    • Locate the fuel shutoff valve and turn it off. This valve is typically located near the carburetor and has a lever that can be turned to the off position.
    • Place a fuel container below the fuel tank’s drain plug, located at the bottom of the tank.
    • Remove the drain plug, either with a wrench or by hand. Allow the gas to flow into the container until it is empty.
    • If there is any old gas remaining in the carburetor or fuel lines, drain it by loosening the carburetor bowl drain plug.
    • Once all the gas has been drained, dispose of it safely and responsibly.

    Consistently draining the gas from your ariens snowblower following these simple steps ensures it stays in excellent condition for longer, and prevents costly repairs in the future.

    When To Drain Gas From An Ariens Snowblower

    Key Points For When To Drain Gas From An Ariens Snowblower

    Winter is a great time to use an ariens snowblower for clearing snow. However, as the season progresses, it is essential to consider when to drain the gas from the machine. Here are the key points to know when draining gas from your ariens snowblower:

    • Store the machine with a clear fuel tank: It is recommended to drain the ariens snowblower’s fuel tank before storage season, which is usually from early spring to late autumn. If the machine is not going to be used for an extended period, it’s better to store the machine with a clear fuel tank. This action prevents the gas from getting stale and the machine from clogging, prolonging its lifespan.
    • Prevent gummed gas from clogging: If the ariens snowblower has been inactive for about a month or more, there may be gummed gas clogging the carburetor. In such cases, it is wise to drain the gas from the machine to prevent further clogging.
    • Refuel the ariens snowblower with fresh gas: When it’s time to use the ariens snowblower again, always refill the machine with fresh gas to ensure its optimal performance and reduce emissions.
    • Check the user manual for further guidance: For specifics on storage and maintenance, refer to your ariens snowblower instructional manual. It gives relevant instructions on the fuel capacity, type of fuel, and recommended cold-weather oil.

    Simple Steps To Drain Gas From An Ariens Snowblower

    Draining gas from an ariens snowblower is a simple process. Here are the straightforward steps to follow:

    • Place the snowblower on a level surface.
    • Turn off the fuel valve switch to cut the gas supply to the engine.
    • Run the engine until it dies: Once the fuel valve is turned off, run the engine until it stalls. This process ensures that the engine doesn’t have any residual fuel that can clog carburetor holes or cause damage.
    • Remove any residual fuel: After the engine has stalled, remove any residual fuel by tipping the snowblower’s fuel tank over a container. This action ensures that there isn’t any leftover fuel that can clog the fuel system.
    • Dispose of the fuel: Finally, dispose of the drained gas according to local rules. It’s illegal to dispose of fuel carelessly, and it also poses a considerable environmental hazard.

    Keep your ariens snowblower in top condition by following these simple steps and guidelines for draining the fuel. By doing this, you’ll enjoy excellent performance and minimal wear and tear on your machine, saving you money in the long term.

    Steps For Draining Gas From An Ariens Snowblower

    Draining Gas From An Ariens Snowblower

    If you own an ariens snowblower and want to store it for an extended period, you must know how to drain the gas from it. Old gasoline can clog the carburetor and damage the engine if left sitting for too long.

    However, draining the gas is not as straightforward as it may seem. In this section, we will guide you through the essential steps you need to follow to successfully drain the gas from your ariens snowblower.

    Step 1: Warm Up The Engine

    Start the engine and run it until it’s warm. This step is essential because warm gasoline drains more easily than cold gasoline. Turn off the engine and let it cool for a few minutes before proceeding.

    Step 2: Locate The Fuel Tank

    The fuel tank is located at the rear of the snowblower. It is either red or white and has a fuel cap on the top. Remove the fuel cap and place it aside.

    Step 3: Disconnect The Fuel Line

    Locate the fuel line that connects the fuel tank to the carburetor. Use pliers to loosen the clamp that holds the fuel line to the carburetor. After loosening the clamp, slide the fuel line off the carburetor.

    Step 4: Drain The Gasoline

    Place a drain pan under the fuel tank to collect the gasoline. Tilt the snowblower forward and backward to drain the gas from the tank into the pan. Once the tank is empty, tilt the snowblower back upright.

    Step 5: Reconnect The Fuel Line

    Slide the fuel line back onto the carburetor, then tighten the clamp with pliers. Put the fuel cap back on the fuel tank.

    Step 6: Start The Engine

    Start the engine and run it for a few minutes. This step ensures that all the remaining gas in the carburetor is used up, preventing the carburetor from getting clogged.

    Congratulations, you have successfully drained the gas from your ariens snowblower! Store it in a cool, dry place away from direct sunlight until the next winter season.

    Tips For Maintaining An Ariens Snowblower

    Maintaining An Ariens Snowblower: Tips And Tricks

    If you are a resident of an area with frequent snowfall, owning a high-powered snowblower like an ariens is a worthy investment. However, like any other mechanical equipment, snowblowers demand regular maintenance to run smoothly and provide an optimal performance.

    We will provide some tips and tricks on maintaining an ariens snowblower to ensure its longevity and optimal performance.

    Regular Checks For Fuel And Oil

    One of the most important steps in maintaining an ariens snowblower is to carry out regular checks for fuel and oil. Here are some of the essential measures:

    • Ensure that you use the right type of fuel and oil as specified in the user manual.
    • Check the fuel and oil levels before starting the engine, and ensure that they are at recommended levels.
    • Change the oil according to the manufacturer’s guidelines and carry out oil filter replacements during the same period.

    Keep The Snowblower Clean

    Another crucial step in maintaining an ariens snowblower is to keep it clean and free from debris and ice. Here are some tips:

    • Always clear out the snow and ice from the machine immediately once you finish using it.
    • After washing the snowblower, ensure that you dry it thoroughly to prevent rust formation.
    • Clean the air filter and replace it once you notice any sign of wear and tear.

    Inspect The Parts Regularly

    The parts of the ariens snowblower need constant monitoring and inspection to ensure that they perform optimally. Here are some tips:

    • Check the belts, augers, and other wear parts regularly, and replace parts as needed.
    • Tighten any loose nuts or bolts to prevent vibrations that could cause damage to the snowblower.
    • Inspect the shear pins and replace them if they are damaged or broken.

    Store The Snowblower Properly

    The way you store your ariens snowblower can also determine how long it will serve you. Here are some tips:

    • Always store the snowblower in a dry, clean, and protected place.
    • Remove any snow or ice buildup from the snowblower before storage.
    • Add fuel stabilizer to the fuel tank to avoid fuel degradation and corrosion.

    By following these tips for maintaining an ariens snowblower, you can rest assured that your equipment will run smoothly and perform optimally for many snow-filled winters to come. Remember to follow the manufacturer’s guidelines, and in case of any confusion, seek the services of a professional technician.

    Frequently Asked Questions On How To Drain Gas From Ariens Snowblower

    How Much Time It Takes To Drain Gas From An Ariens Snowblower?

    Draining gas from an ariens snowblower usually takes around 5-10 minutes, depending on the amount of fuel you need to remove.

    What Tools Do I Need To Drain Gas From My Ariens Snowblower?

    To drain gas from your ariens snowblower, you’ll need a few basic tools, including a drain pan, a siphon pump, and pliers to remove the fuel line clamp.

    Can I Reuse The Drained Gas From My Ariens Snowblower?

    It is not recommended to reuse the drained gas from the ariens snowblower as it might contain debris and water that can damage the engine.

    Do I Need To Turn Off The Engine Before Draining Gas From Ariens Snowblower?

    Yes, it is essential to turn off the engine of your ariens snowblower before draining the gas. Also, let it cool down before starting the process.

    How Often Should I Drain Gas From My Ariens Snowblower?

    It is recommended to drain the gas from your ariens snowblower every 30 to 60 days or when you’re not using it for an extended period.

    Is It Necessary To Wear Gloves While Draining Gas From Ariens Snowblower?

    It is always advisable to wear protective gloves when dealing with gas to avoid skin irritation. Make sure to dispose of the used gloves safely.


    As winter approaches, it is important to know how to properly maintain your ariens snowblower by draining the old gas. Running your snowblower with old or contaminated gas can lead to engine damage and poor performance. With the step-by-step guide presented in this post, you can now easily drain the gas from your ariens snowblower on your own.

    Remember to safely dispose of old gas and always use fresh fuel for optimal machine performance. By taking the time to properly maintain your snowblower, you can ensure its longevity and keep your property free of snow this winter season.

    With the help of this guide, you can save time and money by avoiding costly repairs due to improper maintenance. Winter weather can be unpredictable, but with a well-maintained snowblower, you can be prepared for whatever the season brings.

    Latest Posts


    Don't Miss

    Stay in touch

    To be updated with all the latest news, offers and special announcements.

    error: Content is protected !!